FILES AND INFORMATION

If you have found this page, you too want to bust some ghosts!

Here are links to all the files etc. I have used. I will be adding videos and more links as I complete this project! If you enjoy, please ‘Like and Subscribe’ to my YouTube channel and leave me some comments, Postive and negative, I can only learn from my mistakes!

The Ghostbuster (2019) | Fan Film

Here is a short film to show the finished 3D printed pack – Enjoy!

[embedyt] https://www.youtube.com/watch?v=Fhxy1_qlip0[/embedyt]

One Ghostbuster is separated from his franchise group and gets the call. A Class IV, Matilda is loose but is she the only spook out there?

Video 1

3D Printing, The Ion Arm & Booster

[embedyt] https://www.youtube.com/watch?v=jIj_wnhax3M[/embedyt]

1 – Link to the Stefan Otto’s Ghostbusters Prop Plans that I began with – HERE

2 – Files I used to create my 3D printable G-Codes in video 1 –

Synch Generator – By  tgoacher – HERE
Attenuator – By  tgoacher – HERE
Primary Power Distributor – By  tgoacher – HERE
EDA Base and Ion Arm – By  tgoacher – HERE
Booster innertube – by  TheNewHobbyist – HERE

Video 2

Preparing for Cables. The Spacer and Cyclotron

[embedyt] https://www.youtube.com/watch?v=jH5sBVt8Dho[/embedyt]

Files I used to create my 3D printable G-Codes in video 2

Cyclotron By  tgoacher – HERE
Synch Generator (Spacer) By  tgoacher – HERE
Cosmetic Plating (Centre Cover) By  tgoacher – HERE
Gearbox By  tgoacher – HERE
Power Cell By  tgoacher – HERE
Injector Tubes By  tgoacher – HERE

Video 3

Undercoat and Sanding

[embedyt] https://www.youtube.com/watch?v=sloK8DF8dMY[/embedyt]

Files I used to create my 3D printable G-Codes in video 3

Center Cover Details By – tgoacher – HERE
Motherboard Corner By – tgoacher – HERE
VacTube-Parametric By – tgoacher – HERE
Bumper By – loughkb – HERE
Synch Generator Details By – tgoacher – HERE
Gun Mount By – tgoacher – HERE
Shock Mount By – mooslug – HERE
Primary Power Distributor By – tgoacher – HERE (I did not use this as I had a Resin part from Keymaster Props HERE)
Clippard Valve By –slicerd – HERE
Crank Knob By – slicerd – HERE
Booster Ladder By – slicerd – HERE
Synch Disk By – tgoacher – HERE

Here are the rest of the files I used. They have been found and donated over time.

Cable Clip – By Unknown – HERE
Top Spacer – By Unknown – HERE
Legris Straight – By Unknown – HERE
Ion Arm PH25 Resistor – By – tgoacher – HERE

Video 4

Details and Motherboard Test

[embedyt] https://www.youtube.com/watch?v=_xX8sdKAvoQ[/embedyt]

PlastiKote Stone Effect Paint – HERE
Spray Putty – HERE
Filler Spray – HERE
LOCTITE® SUPER GLUE BRUSH ON – HERE
Ronseal Multipurpose Wood Filler – HERE

Video 5

HGA, N-Filter, and Welding

[embedyt] https://www.youtube.com/watch?v=toKbOdx2O3s[/embedyt]

HGA By – tgoacher – HERE
N-Filter By – MileyORiley – HERE ( IMPORTANT – Increase by 20% size)
Rear Speaker from Fli Audio – Here (I believe it’s an FLI Integrator 6)
Welding Putty – UniBond Epoxy Repair Express – HERE

Video 6

Assemble & Details

[embedyt] https://www.youtube.com/watch?v=CPWVKdX-l3g[/embedyt]

Vinyl Labels from gbfans – HERE
Tubing: Blue (1/4″ OD) from gbfans – HERE
All Resistors by – Fer451 – HERE

MORE FILES ADDED SOON

Video 7

[embedyt] https://www.youtube.com/watch?v=jVSe69anClM[/embedyt]

The Particle Thrower 1 of 2

Files I used to create my 3D printable G-Codes in videos 7 and 8

Neutrona Wand by – WindDrake – HERE

Video 8

The Particle Thrower 2 of 2

[embedyt] https://www.youtube.com/watch?v=wJWQZ4gMolw[/embedyt]

Files I used to create my 3D printable G-Codes in videos 7 and 8

Neutrona Wand by – WindDrake – HERE

Video 9

The Finished Product

[embedyt] https://www.youtube.com/watch?v=vyPGgbuarfs&t[/embedyt]

Sound, lights and smoke, coded and instaled by – Imperial Light and Magic

Video 10

Magnoli Ghostbusters Paranormal Jumpsuits

[embedyt] https://www.youtube.com/watch?v=7PFD2MdjWkI[/embedyt]

Here is a review of my GB1 Tan and GB2 Charcle Paranormal Jumpsuits from Magnoli Clothiers. I compar my original CWU 27/P Nomex Flight Suit with the Magnoli Paranormal Jumpsuit.

References

I have used many references for this build. Here are some links to the most useful things I have found!

Peter Venkman’s hero Pack Replica by Westies14 – HERE
Link to the Stefan Otto’s Ghostbusters Prop Plans that I began with – HERE

Dax79’s Venkman Hero Pack

Dax79’s “Peter Venkman Hero Pack” Facebook heavy picture album – HERE

Ghostbusters Proton Pack – GB1